Luncheons

The (Geo)Science of Safety: How Geoscientists are Making Potash Mines Safer

By Craig Funk, P.Eng, P.Geo

By Craig Funk, P.Eng, P.Geo
Director, Earth Sciences, PotashCorp

Tuesday, October 10th, 2017 – 11:30 AM
Bow Valley Club – Bow Valley Square, 370, 250 – 6th Ave SW

Abstract

Potash, a mineral used primarily in fertilizers, has been mined in the province of Saskatchewan, Canada for some fifty years. The Prairie Evaporite Formation in Saskatchewan is host to the world’s largest potash deposits. Within the Saskatoon area, the upper stratigraphy of the Prairie Evaporite consists of a series of tabular salt and potash beds separated by well-known and regionally distributed planar clay seams. Continuous Boring Machines (borers) are used to mechanically cut the potash ore out of the seams.

When geological disturbances or anomalies are encountered during mining, mining crews exercise extra vigilance because the integrity of the roof can become compromised introducing the potential for exposure to falling rock. These incidents are known as unplanned falls-of-ground. Mining crews are well-trained in the mining procedures and how to identify hazardous conditions, but occasionally subtle geological anomalies can be difficult to identify. Such scenarios are concerning because a combination of subtle geological anomalies can create conditions for falls-of-ground that occur with little to no warning. There is no silver-bullet solution to prevent unplanned falls-of-ground. Typically, such events occur due to a combination of seemingly remote factors aligning – the classic “Swiss Cheese Model”.

In this presentation, I give a brief introduction to potash mining (with a geophysical emphasis!) and then present a more detailed history of the development of a standardized suite of mining practices used at three Saskatoon area mine sites. Admittedly, a discussion on the development of standards is not exciting, however it’s the involvement of geoscientists that make this story interesting. They played a major role in the standards development because it was recognized that the crews needed to have a working knowledge of the geology at their jobsites. Education of the crews was vital in this effort and the standards were used as a foundation for the updated training materials. To help the crews better understand the geology above them, in the mined-out rooms, geophysicists worked with engineers to develop a borer mounted ground penetrating radar (GPR) package. Its purpose is to provide real-time imaging of the roof stratigraphy in order identify any conditions which might lead to instability of the mine roof. This multidisciplinary project is the first known successful implementation of real-time, continuous upward looking GPR on boring machines and it offers the potential of increasing mining safety.

Fig. 01

Biography

Craig Funk, P.Eng, P.Geo is the Director of Earth Science for PotashCorp. The Saskatchewan based company is currently merging with Agrium (based in Calgary) and will be the world’s largest fertilizer company, producing potash, nitrogen and phosphate. Craig has been with the Earth Science team at PotashCorp since 2008, and has been leading the team since 2014. The team’s focus is primarily on providing technical support for the conventional potash mining operations. They routinely use a variety of technologies including seismic, microseismic, GPR, EM, LiDAR, InSAR, GIS and others, for exploration and site assessments.

Craig also manages a variety of mining research projects at PotashCorp. Currently, the research topics include EM and GPR, hydrogeology, rock mechanics and ground support systems, salt and potassium induced corrosion, use of fire resistant hydraulic fluids, and development of innovative rock-bolting systems. Craig also sits on the R&D panel of the International Mineral Innovation Institute, which is an innovation supporting network for mining companies, government departments and agencies, and post-secondary and research institutions, jointly funded by industry and government.

Craig studied at the University of Saskatchewan where he earned a B.Sc. in Engineering Geology/Geophysics and an M.Sc. in Geophysics. He studied under Dr. Don Gendzwill, investigating induced seismicity in potash mines.  A significant portion of his career was focused on development of software applications for hard-rock and soft-rock mining, geotechnical consulting, and the oil and gas services industry. He spent more than a decade working on microseismic technology for hard-rock mining and hydrofracking applications. He has worked in a variety of locations, including South Africa, United States, and Canada. His previous job in Calgary was at Pinnacle, developing microseismic data management software for hyrofrac and reservoir monitoring applications.